Search found 4 matches
- Thu Apr 07, 2011 6:43 pm
- Forum: Lambretta Tech
- Topic: lambretta will not tick over
- Replies: 2
- Views: 6163
lambretta will not tick over
the scooter kick's over sound.when cold and with choke.when warm turn choke off cuts out, rides fine but will not tick over at all.i'v just put new crank,225 barral ,bb clubman on.i' v left jetex 22mm on.i think i need a bigger carb. i try and hold the rev's and the rev's go up and down untill i giv...
- Wed Apr 28, 2010 5:11 pm
- Forum: Lambretta Tech
- Topic: cutting down a li 150 frame and putting GP forks
- Replies: 4
- Views: 3268
cutting down a li 150 frame and putting GP forks
I am cutting down a li 150 s3 frame and putting GP forks and legsheilds on.
What I need is the measurement of a GP head tube from top to bottom without the bearing cups. Or a measurement from top to bottom with both bearing cups in. thanx
What I need is the measurement of a GP head tube from top to bottom without the bearing cups. Or a measurement from top to bottom with both bearing cups in. thanx
- Fri May 08, 2009 10:04 am
- Forum: Lambretta Tech
- Topic: jetting help with carb info
- Replies: 2
- Views: 1908
Re: jetting help
thanx leigh will do that.....leigh wrote:put your complette spec on here ie carb and sure someone can will be along with help, have you looked in the carb section maybe a set up there similar.
Leigh
- Fri May 08, 2009 8:20 am
- Forum: Lambretta Tech
- Topic: jetting help with carb info
- Replies: 2
- Views: 1908
jetting help with carb info
dellorto 30 mm phbh bs.atomizer av266,neddle x7,main jet 150 or 155,pilot jet 55 choke jet 70 .........I have a monza 225 with a 30mm delorto carb, and a jl.and was very surprised to find it had a big flat spot at the top half of the rev's It would start and idle with no problems but would start to ...