Search found 13 matches
- Sat Jan 30, 2016 7:58 pm
- Forum: Vespa Tech
- Topic: New project PX125 advice
- Replies: 22
- Views: 8153
Re: New project PX125 advice
Cheers for the offer, how old is your 20/20? would you be open to my trying yours before i agree to it? Looks like a new ish carb so would be reluctant to swap it if yours is pretty well worn.
- Fri Jan 29, 2016 1:39 am
- Forum: Vespa Tech
- Topic: New project PX125 advice
- Replies: 22
- Views: 8153
Re: New project PX125 advice
Its a rotary valve, already had the carb off, hoping its an LML, fingers crossed.
Thanks for the heads up on the different manufacturers, i wouldn't of had a clue personally.
Thanks for the heads up on the different manufacturers, i wouldn't of had a clue personally.
- Thu Jan 28, 2016 10:43 pm
- Forum: Vespa Tech
- Topic: New project PX125 advice
- Replies: 22
- Views: 8153
Re: New project PX125 advice
Can you explain the LML, Bajaj etc please? Im a total novice with scooters, its my first ever one, bought it just for a change but already im hooked. :D The pipe it has, i have learnt this afternoon, is a performance item made by Simonini, so im guessing the PO bolted a 150 kit on his 125 (E18 is ap...
- Thu Jan 28, 2016 8:25 pm
- Forum: Vespa Tech
- Topic: New project PX125 advice
- Replies: 22
- Views: 8153
Re: New project PX125 advice
Nice one cheers, ive emailed wasp so let you know how i get on 
- Thu Jan 28, 2016 3:54 pm
- Forum: Vespa Tech
- Topic: New project PX125 advice
- Replies: 22
- Views: 8153
Re: New project PX125 advice
Should i be looking for a 20/20? i see there are lots listed on ebay, are the indian ones worth bothering with?
- Thu Jan 28, 2016 3:35 pm
- Forum: Vespa Tech
- Topic: New project PX125 advice
- Replies: 22
- Views: 8153
Re: New project PX125 advice
So looks like i have a 125 crank cases, with a 150 bore kit on it, a 200 carb with 200 jetting (according to vespa maintenance) so th question is, can the 24/24 be jetted to suit a 150 kit, or should i be looking for a smaller carb?
- Thu Jan 28, 2016 3:28 pm
- Forum: Vespa Tech
- Topic: New project PX125 advice
- Replies: 22
- Views: 8153
Re: New project PX125 advice
Looking like 150cc?
- Thu Jan 28, 2016 3:26 pm
- Forum: Vespa Tech
- Topic: New project PX125 advice
- Replies: 22
- Views: 8153
Re: New project PX125 advice
Just reading about the jets now thanks to those previous links, so here is what i have
160 BE3 116
Whipped the head off, its marked 150-s
Barrel is 57.7mm, piston marked 25g13 not had chance to look up the cc yet
But it points to over sized carb at present doesnt it
160 BE3 116
Whipped the head off, its marked 150-s
Barrel is 57.7mm, piston marked 25g13 not had chance to look up the cc yet
But it points to over sized carb at present doesnt it
- Thu Jan 28, 2016 2:20 pm
- Forum: Vespa Tech
- Topic: New project PX125 advice
- Replies: 22
- Views: 8153
Re: New project PX125 advice
Also, previous owner has bypassed the fuel tap, this shouldn't affect running but why would this be done, are they prone to blockage or something?
- Thu Jan 28, 2016 2:19 pm
- Forum: Vespa Tech
- Topic: New project PX125 advice
- Replies: 22
- Views: 8153
Re: New project PX125 advice
Engine number as follows, E18 43010018, barrels has the following marks, PAB 2011 Carb is a SL24-24E Jets are 55-160 and 160 Seems to be running way too rich and flooding up, mixture screw right in and it will tick over for a while and rev, anywhere near standard and it dies quickly, tickover screw ...