Thanks timbo that's good to know!
Hi burnside,
Yes I have done but I'm at the paranoia stage of my jetting as its running to well!
Search found 13 matches
- Fri Jun 10, 2016 7:02 pm
- Forum: Lambretta Tech
- Topic: Dyno Operators
- Replies: 9
- Views: 3452
- Wed Jun 08, 2016 7:11 am
- Forum: Lambretta Tech
- Topic: Dyno Operators
- Replies: 9
- Views: 3452
Re: Dyno Operators
Hi is Diablo still running his dyno as I thought I had seen on here he had retired?
Cheers mark
Cheers mark
- Tue Jun 07, 2016 9:14 pm
- Forum: Lambretta Tech
- Topic: Dyno Operators
- Replies: 9
- Views: 3452
Re: Dyno Operators
Thanks Darnell,
Hopefully could manage that distance without a seizure !
Hopefully could manage that distance without a seizure !
- Tue Jun 07, 2016 8:01 pm
- Forum: Lambretta Tech
- Topic: Dyno Operators
- Replies: 9
- Views: 3452
Dyno Operators
Hi all,
Can anyone recommend a dyno operator in the midlands ideally closest to Hinckley Leicestershire?
Many thanks
Mark
Can anyone recommend a dyno operator in the midlands ideally closest to Hinckley Leicestershire?
Many thanks
Mark
- Wed Sep 16, 2015 6:51 pm
- Forum: Carburettor Set-ups
- Topic: phbh needle help
- Replies: 4
- Views: 3198
- Wed Sep 16, 2015 6:33 pm
- Forum: Carburettor Set-ups
- Topic: phbh needle help
- Replies: 4
- Views: 3198
Re: phbh needle help
Hi Muppet, Yes when choke is on in 3rd gear I get splutter up to 1/2 throttle then splutter 3/4 full, 1/2 to 3/4 makes no noticeable difference with the choke on so am assuming this is a needle issue? this is on a Cast iron 225 factory tune with porting cleaned up cases matched and runs very well wi...
- Mon Sep 14, 2015 7:58 pm
- Forum: Carburettor Set-ups
- Topic: phbh needle help
- Replies: 4
- Views: 3198
phbh needle help
Hi All, Still chasing the elusive perfect set up :lol: current set up; Pilot 55 3 turns out 40 slide Av268 X7 needle 2nd clip Main jet 134 choke 70 My panel filter AF 9-5-1 Head scoot RS with better end can sx150 gear box 47 x 18 sprockets. Seem to be very close now, starts first kick warm or cold i...
- Sat Sep 12, 2015 10:53 pm
- Forum: Carburettor Set-ups
- Topic: Cast iron 225 factory tune 30phbh
- Replies: 21
- Views: 13172
Re: Cast iron 225 factory tune 30phbh
Thanks Gerry,
Yes was considering the x13 but not sure if it might make 1/4 to half too rich?
Yes was considering the x13 but not sure if it might make 1/4 to half too rich?
- Sat Sep 12, 2015 6:58 pm
- Forum: Carburettor Set-ups
- Topic: Cast iron 225 factory tune 30phbh
- Replies: 21
- Views: 13172
Re: Cast iron 225 factory tune 30phbh
Hi All, Still chasing the elusive perfect set up :lol: current set up; Pilot 55 3 turns out 40 slide Av268 X7 needle 2nd clip Main jet 134 choke 70 My panel filter AF 9-5-1 Head scoot RS with better end can sx150 gear box 47 x 18 sprockets. Seem to be very close now, starts first kick warm or cold i...
- Sun May 31, 2015 7:30 pm
- Forum: Carburettor Set-ups
- Topic: Cast iron 225 factory tune 30phbh
- Replies: 21
- Views: 13172
Re: Cast iron 225 factory tune 30phbh
Hi Eden, Just wanted to say many thanks for your advice re jetting have had a successful run out with the following set up 53 pilot 3 turns out Av266 X13 second clip position 135 main 60 choke B9 plug as the b8 was just too hot but may have to go 70 choke or up the pilot as a bitch to start when cold.