Scooterotica

lifes a drag

that looks really nice that, except i hate checker plate with a passion

lifes a drag

just let darrel taylor do it,, or get an imola dont bother matching the cassings just bolt it on, matching casings wont make mutch difference and if your building it yourself you wont have to pull the casing apart to do it so you will make the job easier, 28 mil carb and the PM pipe shoulg give you ...

lifes a drag

in my old one i tried indian 200 crap, indian 150 crap, italian LI 150 loads better, soz i cant remember the sprocket sizes but it had a JL3 and 28 mikuni,un matched casings, 18 bhp went like stink and the only TS1 that ever beat me was a 240, and that only cought me in 3rd gear, oh and it was built...

lifes a drag

what you need is one of those new fangled 5 speed boxes

or an eetalyun LI 150 one

lifes a drag

is the hose braided ?

if it is fit a standard one, if that dosnt cure it use 1 finger to brake

lifes a drag

dont be scared to have a go, these things are easy to work on yourself,
just take your time ( with stickys book at your side ) and check everything twice,
after a while you will be thinking its simple,

and do all that AW has seid on here,,,

lifes a drag

one of the main things that will make it seize is silly revs making it hot, i dont think that is your problem though. like otheres have seid on here check for leaks and timing. if you are conserned about it getting hot with the pannels on i would cut some holes in the top of the pannels as the heat ...

lifes a drag

your meant to clean your filter regularly with proper stuff that will stop water and dust geting through it, it gives the filter a thin coat of oil

http://youtu.be/QR6pGeF-Zw4

lifes a drag

and heres a vid of one in action

http://youtu.be/A_vzR6r8zOs

lifes a drag

heres a link to a few problems with the Aprilia RS 500 that a company in Newzeland were producing,

Very intresting thing about drilling holes in pistons if you go to around page 7 or 8 i think

http://www.apriliaforum.com/forums/show ... r-problems

Search found 174 matches

Re: new winter project

Re: small block top end kits and porting

Re: imola gp200 gearing

Re: imola gp200 gearing

Re: Hydraulic disc brake is too good

Re: Continually seizing with panels on

Re: Continually seizing with panels on

Re: TS1 rain in carb

Re: And you thought scooterists had problems

And you thought scooterists had problems

Login • Register

Advertising