Search found 21 matches
- Tue Jan 23, 2018 10:29 pm
- Forum: Vespa Tech
- Topic: crankshaft locking up
- Replies: 11
- Views: 4754
Re: crankshaft locking up
got a new gasket greased it up and put it on then offered up the flywheel side casing and put on the nuts and bolts and slowly tightened them all up but once again the crank locked up! however i did notice as i was tightening the bolts that the flywheel side casing was pushing the crank into the mai...
- Thu Jan 18, 2018 5:02 pm
- Forum: Vespa Tech
- Topic: crankshaft locking up
- Replies: 11
- Views: 4754
Re: crankshaft locking up
i did that as per the ST dvd but it still split....
all part of the learning curve i suppose
will update when a new gasket arrives
all part of the learning curve i suppose
will update when a new gasket arrives
- Thu Jan 18, 2018 4:45 pm
- Forum: Vespa Tech
- Topic: crankshaft locking up
- Replies: 11
- Views: 4754
Re: crankshaft locking up
stripped the engine down and i think your right with the seal lip not being totally flush so its now tapped in flush had a look at the crank and it seems to be true enough but its not easy to be certain seen as the webs are different diameters to each other also made sure when i was drawing it into ...
- Wed Jan 17, 2018 8:00 pm
- Forum: Vespa Tech
- Topic: crankshaft locking up
- Replies: 11
- Views: 4754
Re: crankshaft locking up
yes thats the one
i will get onto it tomorrow and see what i can find
thanks
i will get onto it tomorrow and see what i can find
thanks
- Wed Jan 17, 2018 7:49 pm
- Forum: Vespa Tech
- Topic: crankshaft locking up
- Replies: 11
- Views: 4754
Re: crankshaft locking up
do you mean the big strange looking metal oil seal on
the main engine block side?
also is it ok to tap out the crank (gently) with a hammer
or will i have to get a dedicated extractor?
the main engine block side?
also is it ok to tap out the crank (gently) with a hammer
or will i have to get a dedicated extractor?
- Wed Jan 17, 2018 7:12 pm
- Forum: Vespa Tech
- Topic: crankshaft locking up
- Replies: 11
- Views: 4754
Re: crankshaft locking up
okay thanks for that will have a look as the
engine has been lying in a box in bits for a good
few years and has been moved about a lot
can you pull in the crank too far on the bearing
on the main engine side? as when the halfs are bolted together
the crank web to engine casing gap seems lopsided
engine has been lying in a box in bits for a good
few years and has been moved about a lot
can you pull in the crank too far on the bearing
on the main engine side? as when the halfs are bolted together
the crank web to engine casing gap seems lopsided
- Wed Jan 17, 2018 11:36 am
- Forum: Vespa Tech
- Topic: crankshaft locking up
- Replies: 11
- Views: 4754
crankshaft locking up
i am restoring an old T5 classic and have taken out the engine striped it and cleaned it up and using the scooter techniques DVD replaced the bearings and cruciform however when i put together the two halfs of the engine and tighten up the bolts the crankshaft locks up and wont turn any suggestions ...
- Tue Sep 01, 2015 12:35 pm
- Forum: Lambretta Tech
- Topic: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test.....
- Replies: 750
- Views: 336290
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
my Avanti jetting is deliberately rich as im still running it in but should finish it off this week
so what your saying about increased noise due to carbon build up rings true in my case
another option is the fatter end can but ill talk to andy francis and see what he thinks
so what your saying about increased noise due to carbon build up rings true in my case
another option is the fatter end can but ill talk to andy francis and see what he thinks
- Mon Aug 31, 2015 5:15 pm
- Forum: Lambretta Tech
- Topic: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test.....
- Replies: 750
- Views: 336290
Re: Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test....
Adam said "I ended up taking this off for a muffled expansion though as early mornings and a quiet neighbourhood didn't suit the loud clubman." can you tell me what type of "quiet expansion pipe" you use on your avanti as im running a franspeed supertourer with the standard end c...
- Mon Sep 01, 2014 10:30 pm
- Forum: Lambretta Tech
- Topic: Fooked Rimini 5 speed.
- Replies: 73
- Views: 20434
Re: Fooked Rimini 5 speed.
below is a photo of my cyclone gearbox http://i1068.photobucket.com/albums/u449/eddie15b2/DSC00744.jpg i put it together like this after reading of other scooterists problems with the version 2 issue the 5th gear cog on the tree and the loose 5th gear are flush (at the top) from this you can see tha...