Scooterotica

taff763

I have a standard everything 125cc engine fitted in my p200e whilst rebuilding the 200 engine, which exhaust and jets would be best for maximum output in the 125 engine, cheers.

taff763

Have you tried adjusting your selector, one cable might be pulling ok, to get you up the gears but the other might be slack causing poor gear engagment coming down the gears?

taff763

Which exhaust would be best for a standard PX 125 without re-jetting. I Just want a little more power but no messing with the settings. Cheers.

taff763

Check you casings has it been rubbing?

taff763

Inner throttle cable catching on outer cable when warm make sure it's clear and not rubbing on anything?

taff763

Just seen a kit to covert a standard PX engine from a 4 speed to a 5 speed, has anyone done this conversion and do you have any feed back?
http://www.thaivespashop.com/detail.asp?pid=43

taff763

Sorted the problem, the slow idle jet had worked it's way loose and as soon as I took the air filter off it fell out, so easy fix thank god.

taff763

I am running a px125 engine in a p200e (lump change whilst I get my 200 fixed), when cold she starts fine just been out and did about 15 miles and running fine, but when I switch her off on the key she won't start again till she has cooled down any ideas? cheers.

taff763

I have taken a 200cc engine out of my scoot and replacing it with a 125cc. Will the exhaust off the 200 be ok on the 125 engine or is there to much difference with the size if the carb/jet set up???

taff763

Thanks for everyone's help on this matter, I guess I just have one of those unlucky engines where everything I do makes no different, I'll put the engine back in today and see what she is like.
Cheers All.

Search found 26 matches

Upgrade!!!!!

Re: vespa px gerchange

Which Exhaust

Re: Pitted crank

Re: Assistance please

5 Gear Vespa????

Re: Difficulty starting warm Engine.

Difficulty starting warm Engine.

Engine swap question.

Re: P200e engine rattle

Login • Register

Advertising