Scooterotica

yellow peril

Does anyone have a contact for supplier who can cut a one off set of GP stripes, i basically need a full length set as i have purchased the 'scooter republic' frenched panels which do not have the facility for the side panel badge.
Cheers in advance

cgi.ebay.co.uk LAMBRETTA-GP-Air- ... 4a9d930e2e

yellow peril

I have the MB version which is welded and lightened, quality piece of kit!
The effect on the dyno was not really noticed (also fitted the BGM stator and retard unit) but the reduced weight on the crank will be beneficial.

yellow peril

Has anyone used the uprated selector spring from MB, i have just had a new gearbox built and i opted for all the 'race tour' parts (layshaft, bearings etc...) the actual selection is very hard and needs two hands to select 1st! we have re looked at the box and all parts are moving freely and toleran...

yellow peril

Has anyone fitted one of these to a reedvalve engine TS1/Monza etc... just how much clearance is there and does it restrict the flow etc...
Just checking before i take the hole saw to the panel!

yellow peril

The power/torque curve comes in quite early and then a straight curve to maximum power at 6000rpm and revs on to 8200, the feeling on the road is you need a 5th gear as the engine can easily pull through low revs in any gear.
As above it feels like it runs out of gears

yellow peril

Skar wrote:I've just fitted one of these from MBD, it's a UNI and the quality appears to be very good.

Thanks for your input, i have gone with the uni version from MBD
Cheers

yellow peril

Does anyone have any specific feedback on the fitment and quality of the non original rear drums on offer, i am currently looking for a replacement and the options seem to be: 1. SIL genuine - Not currently in stock anywhere? 2. FA Auto - The MBD site quotes the quality of these is not ideal and the...

yellow peril

scooty wrote:hi
why dont you try 19/47
is your gearbox italian or indian?
how do you like to ride balls out or steady/brisk?
do you ride solo or 2 up?

I think i need a 'stretched' chain for the 19/47, the gearbox is Indian so the 3rd/4th is quite close, definately a steady/brisk rider and always solo
Cheers

yellow peril

Just had a new Monza 225 engine set up at Replay and now looking at the gearing as like the TS1 is very revvy on standard GP200 gearing (18/47) The engine is running a 30mm PHBH and Franspeed JL3 and dynoed at 22.6hp, my question is has anyone ran 20/47 to achieve 4.7 instead of the usual 19/46 (4.8...

yellow peril

Monza 225 (super monza piston)
Mec 58mm crank
BGM stator & MB lightened and welded flywheel
Augusto 7000
Franspeed JL3
30mm PHBH
45 slide
x2 needle
53 pilot
135 main

22.6bhp set up by chalkie at replay

Search found 33 matches

GP Panel stripes

Re: Indian lightened electronic flywheel.

MB Selector spring

Cam Lam breath sweet filter

Re: Monza Gearing

Re: Rear Drum Quality

Rear Drum Quality

Re: Monza Gearing

Monza Gearing

Re: Lambretta Carb Set-ups.....

Login • Register

Advertising