Scooterotica

jonnyjarvis

gonna be a rockstar... -horrid henry

jonnyjarvis

you spin right around - Alvin and the chipmunks.

jonnyjarvis

Why are you messing about with a mirror ?
Cant be to keep an eye on your mates coz ther all in front of you !

jonnyjarvis

isnt 4% too much for a std 200 ?

jonnyjarvis

I get 1 pint in 1min 10 secs @ the carb ( was advised to pull the fuel pipe off the carb and measure it there, as opposed to timing it coming out of the tap ).

jonnyjarvis

Looking to change my crank on my standard TS1 225. Thinking of getting 60 stroke which will give me 230cc. Pushing out 20 bhp with 16 ft/lb torque at the minute. What kind of difference would it make ( if any ) by simply changing crank compared to changing crank and a mild tune/porting ?

jonnyjarvis

Just what I was looking for. Thanks.

jonnyjarvis

At a custom show last year I seen a series 2 which had a paint job which looked like a bare metal finish. There was a guy handing out cards and promoting the paint with boards of other metal look finishes available. Anyone have a name or contact details of manufacture/supplier ?

jonnyjarvis

Will you have to remove it to change the rear wheel ?

jonnyjarvis

Mate of mine is pulling his hair out. Hes fitted a reed valve and fuel pump ( with a recycle loop with jet acting as a restrictor) to his mallossi 210. Carb is a 30 mm oko. The problem hes having is fuel coming out of the overflow pipe when engine ticking over .

Search found 15 matches

Re: The Song Title Thread - Pointless but Addictive!

Re: The Song Title Thread - Pointless but Addictive!

Re: pm stage 6 mirror help needed

Re: Plug oiling in traffic

Re: Fast Flow Tap Flow Rate

225 TO 230

Re: bare metal paint finish

bare metal paint finish

Re: LTH rear box fitting

fuel pump problem

Login • Register

Advertising