RB20 carb set up.
-
10 inch Terror
- registered user
- Posts: 1447
- Joined: Tue Jun 29, 2010 9:17 pm
- Xbox live gamer tag: No.
- Playstation gamer tag: PLEASE!
- Main scooter: Lambretta LI Imola 185
- Location: Farnborough Hampshire
- Contact:
Hi all, I'm currently putting together a RB20 engine. I'll be using a 30mm Dell'orto VHSH carb with a NK race pipe. Can anyone give me a rough guide as to how I should set my carb up please? Thanks in advance, Pete.
-
ArKaTxU
- Dealer
- Posts: 340
- Joined: Wed Jan 07, 2009 8:26 am
- Main scooter: TV175 64-Jet200 68-Jet200 82
- Location: Rias Baixas
- Contact:
From AF website:
Starting point for jetting Dellorto VHSH 30
Slide – 50
Needle U16 3rd clip from top
Needle jet (atomiser) DQ266
Main Jet 170 Pilot Jet 45 to 55.
Float Valve 300 minimum Choke Jet 50
Mixture screw 2.5 to 3.5 turns out.
Starting point for jetting Dellorto VHSH 30
Slide – 50
Needle U16 3rd clip from top
Needle jet (atomiser) DQ266
Main Jet 170 Pilot Jet 45 to 55.
Float Valve 300 minimum Choke Jet 50
Mixture screw 2.5 to 3.5 turns out.