Aldi compressors £78 and air tools back in stock now
they are Chinese but seem ok
regards
steve
Aldi compressors £78 and air tools back in now
- ArmandTanzarian
- registered user
- Posts: 1103
- Joined: Wed Jan 07, 2009 6:26 pm
- Location: Kent
- Contact:
Went to Aldi today. The compressors look ok for the money and they have a wide range of tools for them.
They also have a load of cheap bike clothing such as gloves, boots, trousers, thermals, and other bibs and bobs.
I bought a wind resistant under jacket thingummy, two bike covers, a neck warmer, some swarfega and some oil removing wet wipes. All reasonable quality and a good price
They also have a load of cheap bike clothing such as gloves, boots, trousers, thermals, and other bibs and bobs.
I bought a wind resistant under jacket thingummy, two bike covers, a neck warmer, some swarfega and some oil removing wet wipes. All reasonable quality and a good price
Meus Lambretta est non infractus. Is est quietus.
I got one of the wind proof undershirts, wore it tonight, seems well cosy for 8quid, nice high neck, didnt need my neck tube
don't think Id bother with the jackets or trousers though
don't think Id bother with the jackets or trousers though
-
- registered user
- Posts: 65
- Joined: Wed Jan 07, 2009 6:11 pm
- Location: Deeside, Flintshire
- Contact:
I purchased one of the Aldi compressors with the free attachments a couple of years ago and successfully sprayed my 150 special in my garage using 2K paints.
The only extra I would recommend buying is an inline water/oil trap.
Considering I had never painted using a compressor before the results were very good.
Piatti
The only extra I would recommend buying is an inline water/oil trap.
Considering I had never painted using a compressor before the results were very good.
Piatti
-
- registered user
- Posts: 71
- Joined: Sun Feb 15, 2009 10:09 pm
- Location: ,location,location
- Contact:
i to purchased one of these compressors and as mentioned good for the little jobs but bear i mind that if you want to use any other lines spray guns etc the fittings are different they are 1/4 inch bsp but they are shorter than is used normally. not a major issue because the compressor has 2 outlets and all i did was change one of them to the longer reach ones so i could use one for the aldi lines and guns etc and the other for standard stuff 
