MB RT 195 kit
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
Can anyone point me to where the articel is on setting up and putting together the above kit? I was reading it the other day on their site but am fecked if I can find it now ( and yes I have doen a search). Looking to slap one together for a lad I'm helping this weekend.
Compact Toolbox Flywheel Holder
-
lammydave
- registered user
- Posts: 200
- Joined: Wed Jan 07, 2009 1:13 pm
- Main scooter: Li150Special RT195
- Location: Ashford, kent
- Contact:
http://scooterotica.org/forum/viewtopic ... 53&t=28785
was it that one, mark??
just done mine... loverly!!
was it that one, mark??
just done mine... loverly!!
Li150 S2 1959. Li150 Special 1964. GP125 1970. Jet 200 Performer 1981. 1967 Sx150. 1959 Li150 S1. 1968 li125 Series 4
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
That's the one David. Very nicely finished bit of kit. Already matched the manifold to the inlet port. 26mm PHBH set in the ball park by Martin. Not sure yet weather to open the transfers on the crank mouth and on the kit. Going on that lad's Siambretta 
Compact Toolbox Flywheel Holder
-
lammydave
- registered user
- Posts: 200
- Joined: Wed Jan 07, 2009 1:13 pm
- Main scooter: Li150Special RT195
- Location: Ashford, kent
- Contact:
what zorst you putting on?? I got a taffspeed copy from martin and a 30mm phbh... runs lovely and sounds great!!
Li150 S2 1959. Li150 Special 1964. GP125 1970. Jet 200 Performer 1981. 1967 Sx150. 1959 Li150 S1. 1968 li125 Series 4