Page 1 of 1

imola 186

Posted: Sun Mar 14, 2010 11:47 pm
by sjc
need some jetting help,,just rebuilt my mates engine and need some jetting details,, using a 28mm dellorto open faced,, scoot rs exhaust,,italian gp 125/ 200 gearbox 18 x 47,, castrol tts power 1 oil at 3% many thanks steve....

Re: imola 186

Posted: Wed Mar 17, 2010 9:30 pm
by sjc
can any-one help please :cry:

Re: imola 186

Posted: Wed Mar 17, 2010 10:11 pm
by sean brady scooters
heres one of ours

imola 186,scootrs pipe,28mm delly

main jet 132
pilot......52
needle ...x7 on 2nd clip
atomiser...AV266
needle/tap jet..250
choke ....70
slide ...40
air screw 1 turn out

hope this helps you mate.

Re: imola 186

Posted: Wed Mar 17, 2010 10:55 pm
by sjc
thanks sean,,

Re: imola 186

Posted: Thu Jun 24, 2010 6:50 pm
by sjc
sean,,have you got any more jetting details for the imola kit,,used your jetting as suggested it runs rich right through the range,,any ideas would be great..all the best steve v.s.s.c.

Re: imola 186

Posted: Thu Jun 24, 2010 10:44 pm
by soullad
sjc wrote:sean,,have you got any more jetting details for the imola kit,,used your jetting as suggested it runs rich right through the range,,any ideas would be great..all the best steve v.s.s.c.
Check choke not sticking on first before you splash the cash :?:

Re: imola 186

Posted: Fri Jun 25, 2010 3:01 pm
by sjc
the chokes working perfect thanks though..steve v.s.s.c.

Re: imola 186

Posted: Sun Jun 27, 2010 1:15 pm
by sjc
sorry soullad,,you was right,the choke wasnt sitting all the way down in its recess,,,cheers sean runnin spot on now,,,thanks for all the help..steve..virgin soldiers s.c.