Scooterotica

hi guys...just trying to gauge what oil and percentage people use in there ts1...i here people using anywhere from 2% to 4% oil mix in there fuel...
i use 3% mix ( jug and half using a 2% jug for every 5 litres of fuel )with rock oil pre mix.....

other feed back from other engines rb's etc would be great as well

I use 3% in my TS1 and 4% in my RB. I currently use SIP oil.

I use sip @ 3%. when my scoot was set up on the dyno I was told to run @2% but I just can't bring my self to use such a small amount of oil.

hi,i use a little over 2% in my monza 240,
6 measures to 5 litres,runs fine for me

200mm oil to 5 litres petrol.

3% mx5 putoline on ts1

3% Rock Oil fully synth in my TS

2 - 3% depending on what i'm doing, 3% for a long run.

i use 4% S.I.P oil, rayspeed say to use 4% they make the kit they should know.if it nips up what defence can you use!

i use a 3% mix
its not that alloy or nicasil cant take a 2% mix i just want the big end to get enough lubrication too