ts1 fuel %

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
yam-lam
registered user
Posts: 79
Joined: Sat Mar 28, 2009 9:24 pm
Main scooter: serveta 125li & t5
Location: living the walsall dream
Contact:

hi guys...just trying to gauge what oil and percentage people use in there ts1...i here people using anywhere from 2% to 4% oil mix in there fuel...
i use 3% mix ( jug and half using a 2% jug for every 5 litres of fuel )with rock oil pre mix.....

other feed back from other engines rb's etc would be great as well
Bufficus
registered user
Posts: 271
Joined: Wed Jan 07, 2009 1:38 pm
Location: Chelmsford, Essex
Contact:

I use 3% in my TS1 and 4% in my RB. I currently use SIP oil.
User avatar
lockman69
registered user
Posts: 257
Joined: Wed Jan 07, 2009 12:09 pm
Location: Chelmsford, Essex
Contact:

I use sip @ 3%. when my scoot was set up on the dyno I was told to run @2% but I just can't bring my self to use such a small amount of oil.
lamy150
registered user
Posts: 50
Joined: Fri Feb 27, 2009 7:20 pm
Contact:

hi,i use a little over 2% in my monza 240,
6 measures to 5 litres,runs fine for me
Mel K

200mm oil to 5 litres petrol.
User avatar
timdig
registered user
Posts: 16
Joined: Wed Jan 07, 2009 9:55 pm
Contact:

3% mx5 putoline on ts1
Mag
registered user
Posts: 139
Joined: Thu Nov 05, 2009 11:02 pm
Main scooter: Carbon GP TS1
Location: Sunderland by the Sea
Contact:

3% Rock Oil fully synth in my TS
User avatar
hungdog
registered user
Posts: 169
Joined: Wed Sep 16, 2009 2:57 pm
Contact:

2 - 3% depending on what i'm doing, 3% for a long run. :geek:
ratty
registered user
Posts: 55
Joined: Sat Jan 30, 2010 4:55 pm
Main scooter: LI ser3 125 {TS1 230} 1963
Location: tiptree,essex
Contact:

i use 4% S.I.P oil, rayspeed say to use 4% they make the kit they should know.if it nips up what defence can you use!
how much!!!
User avatar
scooty
registered user
Posts: 70
Joined: Wed Jan 07, 2009 8:12 pm
Contact:

i use a 3% mix :)
its not that alloy or nicasil cant take a 2% mix i just want the big end to get enough lubrication too
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Google [Bot] and 11 guests