Idle jet emulsion tube ?

Check here for a list of various carb set-ups to help with jetting and all aspects of carb trickery!
Post Reply Previous topicNext topic
User avatar
Spursy
registered user
Posts: 36
Joined: Sat Sep 26, 2009 1:37 pm
Main scooter: Series 2 Bgm Race-Tour
Location: England and proud of it
Contact:
Contact Spursy

Got a 30mm VHSH and read some were some people take these out of the carb so it improves the fuel flow ,my ? is does it ,,,,,any one tried this ? :roll:
Top
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:
Contact drunkmunkey6969

Spursy wrote:Got a 30mm VHSH and read some were some people take these out of the carb so it improves the fuel flow ,my ? is does it ,,,,,any one tried this ? :roll:
MB dont think so..... http://www.lambrettaspares.com/sparepar ... 10532.html
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Top
User avatar
Spursy
registered user
Posts: 36
Joined: Sat Sep 26, 2009 1:37 pm
Main scooter: Series 2 Bgm Race-Tour
Location: England and proud of it
Contact:
Contact Spursy

tried taking it out this morning ,, only dif it was made it seem alittle boggy given a little revs ,, used a smaller idle seemed to cure it ,, in the end i could'nt be arsed to mess with it so stuck emulsion tube back in :lol:
Top
Post Reply Previous topicNext topic

Return to “Carburettor Set-ups”

  • Information

  • Who is online

    Users browsing this forum: No registered users and 8 guests

Powered by phpBB™ • Design by PlanetStyles