Serveta Fat dampers + ScootRS outboard disk
-
Fruitjuice
- registered user
- Posts: 201
- Joined: Fri Jan 09, 2009 8:26 pm
- Location: Ghent, Belgium
- Contact:
The original ScootRS discbrake conversion fits no problem, at least it does on my scooter! The new anti dive 'might' be a problem as the dampers sit very close to the fork legs and you could have troubles fitting the anti dive bracket inbetween the fork leg and the damper...
Life shouldn't be a journey to the grave with the intention of arriving safely in a pretty, well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, loudly proclaiming: "WOW, WHAT A RIDE"
-
Furious George
- registered user
- Posts: 23
- Joined: Tue Jan 27, 2009 5:22 pm
- Location: Anal Town
- Contact:
Same here, I have the original without anti-dive and no problems.
FG
FG
Charlie don't surf
-
rbgaz
- registered user
- Posts: 539
- Joined: Tue Mar 17, 2009 6:16 pm
- Main scooter: gp rb230 dragster 180lc
- Location: braintree lambretta breakfast club
- Contact:
just fitted the anti dive one with bgm dampers and its very tight , one of the nuts on the anti dive bracket touches the bgm shock, but i dont know if the serveta ones are fatter than a bgm ?
btw its nice bit of kit and makes for a luvly ride
btw its nice bit of kit and makes for a luvly ride