Are there diffrences in throttle gear change rods between Li and say GP,s? My Li has a splined end with a groove cut out, do GP ones differ in any way, eg not have splines or the groove cut in them. This relates to another thread i have going on QA throttles...
Ta
sef
Throttle gear change rod
-
sydduckett
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
-
rakki
- registered user
- Posts: 91
- Joined: Sun Mar 15, 2009 1:07 pm
- Main scooter: sx|px|rally×2
- Location: Helsinki, Finland
- Contact:
Splined ones are for brass rollers, plain ones are for later models with plastic rollers.
Don't know when Innocenti changed from brass to plastic, probably at the same time when they ditched chrome rings.
Don't know when Innocenti changed from brass to plastic, probably at the same time when they ditched chrome rings.
-
rog60
- registered user
- Posts: 588
- Joined: Fri Feb 13, 2009 7:18 pm
- Main scooter: Indian GP200
- Location: SWINDON (Wilts)
- Contact:
Cheaper to produce..................rakki wrote:Splined ones are for brass rollers, plain ones are for later models with plastic rollers.
Don't know when Innocenti changed from brass to plastic, probably at the same time when they ditched chrome rings.
NO IT'S NOT A F***IN* MOPED!!!!!!