does anyone have any pics of hydraulic hose route on series 2 ?
also best place to buy hose (not made up ) length reqd and what angled
ends are reqd.
thanks fritz.
series 2 hydraulic hose route
http://www.venhill.co.uk/
They make them to any size
They make them to any size
-
paul lester
- registered user
- Posts: 12
- Joined: Wed Jan 07, 2009 11:08 pm
- Main scooter: italian gp 125
- Location: hornchurch essex
- Contact:
http://lambrettaupgrades.co.uk/default.aspxfritz wrote:does anyone have any pics of hydraulic hose route on series 2 ?
also best place to buy hose (not made up ) length reqd and what angled
ends are reqd.
thanks fritz.
chiggy chambers top notch hose
-
eibargum
- registered user
- Posts: 368
- Joined: Wed Jan 07, 2009 6:38 pm
- Main scooter: Vespa PX210 Polini
- Contact:
The angle of the ends i use to make a nice neat job of it is 90 degrees at the top and a straight at the bottom, length of hose used iam not sure, but could try and estimate if nobody comes up with the right length. You,ll have to take abit of meat off the big steering locking thingy 
to get the hose past it. Its not as easy on a series 2 as it is on a GP.
to get the hose past it. Its not as easy on a series 2 as it is on a GP.
where is the best place to drill headset? towards the headlight?
and i take it just the top.
fritz
and i take it just the top.
fritz
i dremelled a groove in the bottom and used a bent banjo to bring the hose nearer front light . i did it all with headset top of and just let the hose decide where it wanted to lay.
hi mark
did you go between junction box mounts? any pics
many thanks fritz
did you go between junction box mounts? any pics
many thanks fritz
sorry no more pics . i just did it where the hose lay naturally.
-
jason frost
- Dealer
- Posts: 485
- Joined: Wed Jan 07, 2009 11:45 am
- Contact: