Mag Housing
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
Rebuilding mag housing and having a bit of a problem seating the large circlip. Have faced it off a bit to try to sit it in the groove correctly. Is it common for the L shaped spacer to be able to spin/rattle once everything is put back together? Using Rolf outer seal, L shaped spacer, NU2205, Viton inner seal and large circlip.
Compact Toolbox Flywheel Holder
-
sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
are you sure the bearing is seated in fully...?
Sean Brady Scooters - 01765 690 698
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
Reckon if I tap it any harder it'll come through the other side. All sorted now. Thank Christ at least you are awake Sean
Compact Toolbox Flywheel Holder