Mikuni or Dellorto ?

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
lockman69
registered user
Posts: 327
Joined: Wed Jan 07, 2009 12:09 pm
Location: Chelmsford, Essex
Contact:

Sat Jan 24, 2009 7:43 pm

I want to buy a bigger carb for my stage four 200, what’s the best, Mikuni or Dellorto?

Cheers

CPH Lambretta
registered user
Posts: 406
Joined: Mon Jan 12, 2009 4:53 pm
Main scooter: DL 150 1970
Contact:

Sat Jan 24, 2009 8:09 pm

Whats the best? It has to be Mikuni 8-)
Slow is the new fast!

User avatar
corrado
Dealer
Posts: 3209
Joined: Thu Jan 08, 2009 1:12 am
Main scooter: Lambretta GP
Location: Top of Blackpool Tower
Contact:

Sun Jan 25, 2009 2:30 am

Messed about with a PHBH 30 mm for ages on my Imola, even had it dynod but it never ran crisp throughout the range. Fitted a Mikuni TMX 27 with the jetting that was recommended and it transformed it, never touched the jetting in about 5,000 miles. Better top end, better pick up and better MPG. I'll never use a Dellorto again.

User avatar
lockman69
registered user
Posts: 327
Joined: Wed Jan 07, 2009 12:09 pm
Location: Chelmsford, Essex
Contact:

Sun Jan 25, 2009 5:47 pm

Cheers Guys

Best place to buy a Mikuni ??

User avatar
ArmandTanzarian
registered user
Posts: 1776
Joined: Wed Jan 07, 2009 6:26 pm
ebay user ID: armand-tanzarian
Location: Kent
Contact:

Sun Jan 25, 2009 6:06 pm

lockman69 wrote:Cheers Guys

Best place to buy a Mikuni ??
In the good old days when a dollar was worth 55p then you couldn't beat Jet200 in the States who charged almost the same price in dollars that MB charged in pounds!

Now that the Pound is worth feck-all you might try Justlambretta if he has any although I expect his prices (and everyone elses) are about to skyrocket as everything is imported.
Meus Lambretta est non infractus. Is est quietus.

User avatar
mickeyb
registered user
Posts: 63
Joined: Fri Jan 16, 2009 1:26 am
Location: Enniskillen
Contact:

Sun Jan 25, 2009 6:59 pm

put a delly on me Ts1 when i bought it....crap, then bought a 35mil mikuni TMX....absolutely fantastic,Mikuni for me, as its been said b4 ive bought 3 Mikuni's from Jet 200 when the pound was strong.

User avatar
paulmgreen
registered user
Posts: 589
Joined: Sun Jan 04, 2009 4:34 pm
ebay user ID: hgracingscooterparts
Main scooter: Lambretta Group 4 Race 200
Location: Grantham
Contact:

Sun Jan 25, 2009 7:22 pm

Google Allens Performance.... they are a main importer
YouTuve Vlog channel - https://www.youtube.com/channel/UCEhrgL ... vY_4Px2WTg

www.JPPLambretta.co.uk

Sponsors Replay Scooters JPPLambretta

User avatar
MarkH
Dealer
Posts: 168
Joined: Wed Jan 07, 2009 11:35 pm
Location: Seattle, WA USA
Contact:

Sun Jan 25, 2009 7:53 pm

I doubt you can beat our price, even with the $35USD shipping added. You also get more for less with our kits.

If you're just keeping the top-end standard and going with a big bore, the TM24 is a good way to go.

User avatar
jonny snatchsniffer
registered user
Posts: 318
Joined: Mon Jan 12, 2009 11:53 am
Location: camberley, surrey
Contact:

Sun Jan 25, 2009 8:12 pm

so how much for a 250 main and p5 needle jet ? its for a tmx30

User avatar
lambro63
registered user
Posts: 36
Joined: Sun Jan 11, 2009 10:24 pm
Main scooter: series 2 TS1
Location: balderton nottinghamshire
Contact:

Sun Jan 25, 2009 8:37 pm

corrado could you forward the settings on your tmx 27 set up please i am thinking of marrying one to a standard 200
regards
big pete lambro63 (spiderman)

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 9 guests