Page 1 of 1
Nuts for New Franspeed RB Stub
Posted: Sat Oct 31, 2009 7:45 pm
by davidblythe
Nick J and I spent a couple of hours making new exhaust nuts for his RB with the new style exhaust stub
able to be lockwired and very easy to tighten in situ, the same couldnt be said for taking the original nuts off
sorry about quality of pics
Re: Nuts for New Franspeed RB Stub
Posted: Sat Oct 31, 2009 7:55 pm
by Andy Pickering
David .. Ive watching your nuts for sale on fleabay..
..are ye gonna do some for a PM 25 matey..
you seem to have done all but..Ive got money waitng my friend..
standard down pipe no TS1
Re: Nuts for New Franspeed RB Stub
Posted: Sat Oct 31, 2009 8:12 pm
by davidblythe
I dont know anyone running a PM on a Iron Scoot, have an old Iron PM which appears to have a decent drop before the bend and it seems the tight nut would be on the kickstart side
are there many variations with PM's does the above make sense compared to your pipe
if so I can do one
Re: Nuts for New Franspeed RB Stub
Posted: Sun Nov 01, 2009 1:01 am
by corrado
Are they any different from the ones I already have from you David? Only I've just ordered a Franspeed Race for my RB.
Re: Nuts for New Franspeed RB Stub
Posted: Sun Nov 01, 2009 7:22 am
by davidblythe
Not too different
drill 6 holes about 15mm down from the top to lockwire, normal place means wiring would have to be cut to remove exhaust
slightlly longer turned length to clear stub as clearance is very tight, use a spring washer,
let me know if too short
Re: Nuts for New Franspeed RB Stub
Posted: Sun Nov 01, 2009 8:10 am
by leigh
Are you selling these had a bitch of a job getting nuts on new stubb. They look the business
Leigh
Re: Nuts for New Franspeed RB Stub
Posted: Sun Nov 01, 2009 8:39 am
by davidblythe
leigh wrote:Are you selling these had a bitch of a job getting nuts on new stubb. They look the business
Leigh
yes same price as other £11 via paypal
davidblythe@hotmail.com
Re: Nuts for New Franspeed RB Stub
Posted: Sun Nov 01, 2009 9:46 am
by Andy Pickering
davidblythe wrote:I dont know anyone running a PM on a Iron Scoot, have an old Iron PM which appears to have a decent drop before the bend and it seems the tight nut would be on the kickstart side
are there many variations with PM's does the above make sense compared to your pipe
if so I can do one
AHH that reminds me..
..Running a scootrs downpipe as the PM was TS1 stub..just slipped straight on actually it was a better fit than the scootrs pipe..gonna strip top end of very soon so will take a better look David.
Re: Nuts for New Franspeed RB Stub
Posted: Sun Nov 01, 2009 12:36 pm
by leigh
davidblythe wrote:leigh wrote:Are you selling these had a bitch of a job getting nuts on new stubb. They look the business
Leigh
yes same price as other £11 via paypal
davidblythe@hotmail.com
will get done later tonight
Leigh