My mate Gary`s smally :baddevil:
Agent Orange
Absolutely fantastic mate!......shud go well across the water that
love the engine side panel
nice smallframe! What about the engine?
-----Besa Boga Scooter Alliance-----
-----------Reggio Emilia----------
--------------Italy---------------
http://www.facebook.com/home.php?#/besa ... ef=profile
-----------Reggio Emilia----------
--------------Italy---------------
http://www.facebook.com/home.php?#/besa ... ef=profile
- Bofs
- registered user
- Posts: 391
- Joined: Wed Jan 07, 2009 7:25 pm
- Main scooter: Zundapp Betta 500
- Location: Derry
- Contact:
Cheers folks, engine-wise it`s nothing mental unfortunately. DR130, PM pipe and 24mm Delly,upgear kit, still has standard crank and points, runs like a dream.
It`s had a full resto by myself including full legshield replacement.
It`s had a full resto by myself including full legshield replacement.
Muffspeed....no muff too tuff
Bad Samaritans SC
1957 Zundapp Betta 500 Auto
1966 Motovespa Sprint 210 Polossi
1960 Lambretta Cutdown 205 Project
Bad Samaritans SC
1957 Zundapp Betta 500 Auto
1966 Motovespa Sprint 210 Polossi
1960 Lambretta Cutdown 205 Project
-
- registered user
- Posts: 174
- Joined: Tue Jan 13, 2009 5:08 pm
- Contact:
looking good ,
could do with a shorter inlet manifold though ,
could do with a shorter inlet manifold though ,
- Bofs
- registered user
- Posts: 391
- Joined: Wed Jan 07, 2009 7:25 pm
- Main scooter: Zundapp Betta 500
- Location: Derry
- Contact:
Here`s a bit of a recap on Gaz`s smally, started off as a rough but running Vespa 100
It was stripped, sandblasted, had new leggies and struts fitted and any dodgy metal has been cut out and replaced with original metal from it`s own scrap legshields! Gary purchased some class goodies inc. new leggies and horncast from SIP,PM pipe,Bitubos as well as all new loom and trim to go on this on assembly and Scooter dug out a 4 speed box from his smallframe stash ;D
It was stripped, sandblasted, had new leggies and struts fitted and any dodgy metal has been cut out and replaced with original metal from it`s own scrap legshields! Gary purchased some class goodies inc. new leggies and horncast from SIP,PM pipe,Bitubos as well as all new loom and trim to go on this on assembly and Scooter dug out a 4 speed box from his smallframe stash ;D
Muffspeed....no muff too tuff
Bad Samaritans SC
1957 Zundapp Betta 500 Auto
1966 Motovespa Sprint 210 Polossi
1960 Lambretta Cutdown 205 Project
Bad Samaritans SC
1957 Zundapp Betta 500 Auto
1966 Motovespa Sprint 210 Polossi
1960 Lambretta Cutdown 205 Project