Page 1 of 1
TS1/JL4 PIPE
Posted: Fri Aug 28, 2009 7:36 pm
by mickeyb
looking for a starting point on the above with a 35 TMX Mikuni please...Thanks
Re: TS1/JL4 PIPE
Posted: Fri Aug 28, 2009 8:02 pm
by drunkmunkey6969
Every one is different, but you can start here.......20 pilot / 320 main / 57 needle, middle clip......and take it from there.
Re: TS1/JL4 PIPE
Posted: Fri Aug 28, 2009 8:43 pm
by Bufficus
My TS1 230 with a very big exhaust port, widened boost and transfer feeds runs very lean with a JL4
Pilot 17.5-20
58 Needle top clip
320 Main
And its still too rich at 1/4 throttle.