Page 1 of 1
Help ID a 66.8 Piston
Posted: Sun Aug 23, 2009 10:46 pm
by hobospeed
Hey Guys,
I need some help identifying a Lambretta piston, please see the pictures below:
hoping to find some rings as the bore looks ok and I think I can get away with just a quick clean up of the piston skirt.
Thanks,
Tim
Re: Help ID a 66.8 Piston
Posted: Mon Aug 24, 2009 4:59 am
by bristolmod
Hepolite I think.
The logo on the inside appears to be an entwined "A" and an "E" which stands for Associated Engineering.
I might have a set of rings out in the shed- will check when I get back from work
Chris
Re: Help ID a 66.8 Piston
Posted: Mon Aug 24, 2009 9:08 am
by bristolmod
just checked with a genuine Hepolite piston I've got, and its NOT the same make- sorry.
Also, no 66.8 rings either (got loads of 66.4 if any good)
Chris
Re: Help ID a 66.8 Piston
Posted: Tue Aug 25, 2009 4:26 am
by hobospeed
Thanks anyway Chris!
To me the marking looks more like a V and S or I guess a A and S when upside down like in the photo I posted.
bristolmod wrote:just checked with a genuine Hepolite piston I've got, and its NOT the same make- sorry.
Also, no 66.8 rings either (got loads of 66.4 if any good)
Chris