Page 1 of 1
wanted....... standard 180 runner jets.
Posted: Sun Aug 23, 2009 7:34 pm
by goldeneye
right peeps, got me runner ............ errrrrrrr,,,,,,, running, and its a 125 carb , runs ok with 45 pilot and 86 main jet..... but its only a short hop to work, so really need a 50 pilot and 90/92 main jet for my dellorto 20.5mm. as you might of guessed, im tight as fook, and will buy you a pint for the jets. so ....... 50 pilot 90 main......... phpv 20.5mmcarb. any ganners?
Re: wanted....... standard 180 runner jets.
Posted: Mon Aug 24, 2009 7:23 am
by lee
Hey goldeneye I have 90 main jet . I will take it to the beerpigs do . If that's any good for you
Re: wanted....... standard 180 runner jets.
Posted: Mon Aug 24, 2009 10:55 am
by goldeneye
aye lee, thats spot on mate, i"m going up on saturday. see you there.
Re: wanted....... standard 180 runner jets.
Posted: Tue Aug 25, 2009 3:33 pm
by C*NTSPEED
standerd main is 88??????
Re: wanted....... standard 180 runner jets.
Posted: Tue Aug 25, 2009 11:22 pm
by goldeneye
its running ok on an 86! but its only me work scoot, so i"ll get the 90 off lee, and see what its like. funny this, it seems dragsters and runners 180"s seem to vary the jets in the dellortos. i had a mikuni fitted before, so didnt notice the difference with the dellys.
Re: wanted....... standard 180 runner jets.
Posted: Wed Aug 26, 2009 11:24 am
by C*NTSPEED
delly carbs shite end off