Scooterotica

Hey all

So renovation of my NSU Prima D is coming on well all stripped down engine un-seized and with the garage being cleaned and checked.

Frame all sanded down and resprayed just waiting for engine to get back and can can’t rebuilding.

I do have a couple of questions:

I have a Draper grease gun but I can’t seem to find a connector or collection of connectors to convert the gun to the grease nipples. The grease gun is this one: https://www.toolstation.com/draper-14-a ... gun/p41605

And I have attached a picture of one of the grease nipples

Also what grease would be recommended for the forks bearings and steering bearings?


Sent from my iPhone using Tapatalk

Picture didn’t attach


Sent from my iPhone using Tapatalk

I am unfamiliar with the grease gun you refer to. Many years ago, I bought an antique grease gun for not much money. I have just done a search and you can still pick up similar for not much money. I have never had an issue with it fitting Lambrett grease nipples which, I would guess are a very similar size.