Scooterotica

Looking for advise on exhausts.
I want to fit an expansion. It’s for a 225 race rapido with a reed fitted.
Want something for fast touring. with decent clearance and a power band that starts to come in about 4k, peak power about 6k but will rev on to 8k.
Is there such a thing?


Sent from my iPhone using Tapatalk

ADS-3 or Fran supertourer maybe?

Norrie Bodge wrote: ↑Thu Oct 17, 2019 9:25 am ADS-3 or Fran supertourer maybe?

Scoot wrote: ↑Thu Oct 17, 2019 12:57 am Looking for advise on exhausts.
I want to fit an expansion. It’s for a 225 race rapido with a reed fitted.
Want something for fast touring. with decent clearance and a power band that starts to come in about 4k, peak power about 6k but will rev on to 8k.
Is there such a thing?


Sent from my iPhone using Tapatalk

I have a Rapido 225 just been built and i'm using a franspeed super tourer with non reed dynoed at 28bhp but really does depend on who tuned it to get the right exhaust for it.Mine was done to suit the carb,exhaust and gearing set up you may want to speak with whoever tuned your motor and see what they recomend.

Don’t like super tourer didn’t suit my ts1. Swapped for an NK also use NK in a SS250 great all round exhaust

LI150 wrote: ↑Thu Oct 17, 2019 4:38 pm Don’t like super tourer didn’t suit my ts1. Swapped for an NK also use NK in a SS250 great all round exhaust

super tourers don't suit all kits but it does suit a rapido i have my endurance scoot running a ts1 225 motor running a fran race and pulls really well,RB 20 production motors run really well with a franspeed,my monzas don't i use TSR's.Horses for courses as they say my latest motor is a SSR250 with a race proti as it's the zorst most suited for the kit wouldn't dream of putting any franspeed on it unless i wanted it to go slower.

Norrie Bodge wrote:

Norrie Bodge wrote: ↑Thu Oct 17, 2019 9:25 am ADS-3 or Fran supertourer maybe?

Not used an ADS-3. The graph for the franspeed looks good on paper but I’ve had one and it comes in a bit to harsh for my liking.


Sent from my iPhone using Tapatalk

af rayspeed have just brought out a new pipe, might be just what you need

holty wrote:af rayspeed have just brought out a new pipe, might be just what you need

Thanks I will take a look


Sent from my iPhone using Tapatalk

holty wrote: ↑Fri Oct 18, 2019 4:37 pm af rayspeed have just brought out a new pipe, might be just what you need

Holty
Anymore info on the new AF pipes spec?