lambretta engine mounting position, 2 hole

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
registered user
Posts: 894
Joined: Wed Jul 15, 2015 11:52 pm
ebay user ID: amholt123
Main scooter: lambretta gp
Location: east yorkshire

Sun Sep 08, 2019 4:46 pm

hi folks can one of you comfirm the position of the kickstart silent block, its a 2 hole type,gp type, it will be indian, im only changing it as im fitted a casa flat bar with offset cones, think sticky book says hole between 10 and 1 oclock, does that sound right ? on a 3 hole I always put the bottom hole at 6 oclock and the other holes towards the front of the scooter ?
thanks in advance,

registered user
Posts: 197
Joined: Thu Apr 30, 2009 8:30 pm

Sun Sep 08, 2019 6:53 pm

I think it should be fitted with the holes at 2 & 4 o'clock on the kickstart side, I believe the "voided" 2 hole Indian type were fitted at 10 & 1 but I think this type of mount hasn't been available for a long time, hope this helps ;)

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 9 guests