Scooterotica

So trying to wire up my sx- the loom is a new 12v one – it seems to have a black a purple a brown and green

So a SX switch and key ignition in headset

The brown and green black are easy enough—just match them up – but where does the purple go-

I read in a manual Purple from the main loom, to purple on the ignition switch, purple is an auxiliary power feed. But the ignition switch doesn’t have a purple it has a pink (earth) yellow I think is speedo bulb or side light a blue ( no idea what blue is) orange, brown, black, I cant get the lights to work at the front—if I add the purple with the 2 blacks ( one from loom and one from ignition switch) it seem to power the back light- any ideas

orange I've done to orange of the light switch (brown to brown black to black in head set)

You have an Indian ignition switch, on these the blue is the equivalent to purple, which is the feed for pilot lights in key position 2.

thanks so where do i add the purple from the main loom

is that now to go next to the blue

Yes, loom purple to switch blue.

thanks for your help