Clutches for P200e

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
railfancwb
registered user
Posts: 129
Joined: Tue Oct 27, 2015 3:51 am
Contact:

Tue Aug 06, 2019 5:12 am

On eBay I see clutches listed with 20, 21, 22, and 23 teeth. Far less offers of 20 tooth clutches.

Have seen comments here and there about trading acceleration for top speed or vice versa by using a clutch gear with a different number of teeth.

What is the standard or factory default number of teeth for the clutch gear in the P200e?

How much can the gear be changed without also having to change the tree cluster?

Thanks


Sent from my iPhone using Tapatalk

Norrie Bodge
registered user
Posts: 454
Joined: Thu Oct 25, 2012 2:49 am
Main scooter: 80-P220e/71-GP230/60-S2-Ts-230
Contact:

Tue Aug 06, 2019 9:28 am

23tooth clutch on the P200E or PX200E
using a P125(early) or T5 fourth (for later PXE) shortens the gearing slightly so will pull 4th better but you’ll loose a bit on topend

Jack221
registered user
Posts: 215
Joined: Mon Jul 29, 2013 8:18 am
Main scooter: PX221
Location: London
Contact:

Tue Aug 06, 2019 12:16 pm

DRT make a 24 tooth cosa cog for the 65 tree. Gearing is then quite high, so without more power it's going to struggle.
Vespa est ieiunas, quia semper operaturi

User avatar
Muttley McLadd
registered user
Posts: 2552
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

Wed Aug 07, 2019 1:55 am

railfancwb wrote:
Tue Aug 06, 2019 5:12 am

How much can the gear be changed without also having to change the tree cluster?
How much would you want to change it? I'm fairly sure DRT make all sorts of different gearing options.
What is it you want to achieve?
CakeAndArseParty

tony172
registered user
Posts: 114
Joined: Sun Jan 13, 2013 10:50 pm
Main scooter: vespa t5
Contact:

Thu Aug 08, 2019 9:20 am

P200 is 23/65 standard, have a look on scooterhelp at their gearing calculator for a guide. I'm currently looking for a 65t cog for my spare engine and struggling to find one second hand.
My preference for a tuned engine is 23/65 on a 125 box, but never tried the 67t cog in any combination so who knows what that's like

User avatar
Shaunbond
registered user
Posts: 180
Joined: Sun Feb 15, 2009 6:00 pm
Location: Preston, Lancs
Contact:

Thu Aug 08, 2019 5:37 pm

My BGM177 runs 23/68 using a DRT centre. It's a great set up but you need the HP to pull it, hence standard px125 being 21 tooth.
Serial scooter rider...
VMSC Committed to Scootering for 25 years

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest