VBB 10" wheel conversion
Posted: Thu Jul 18, 2019 10:17 pm
How do I go about a 10" wheel conversion on a 150 VBB? Do I just fit PX forks and a PX engine?
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
VBB 10" wheel conversion
Page 1 of 1
Re: VBB 10" wheel conversion
Posted: Wed Jul 24, 2019 10:13 pm
I'm sure sip make an 8 to 10" conversion retaining the existing hubs
Re: VBB 10" wheel conversion
Posted: Sat Jul 27, 2019 5:40 am
If you have a speedometer/odometer driven from the front wheel you will need to deal with that.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: VBB 10" wheel conversion
Posted: Sat Jul 27, 2019 9:41 pm
Rough measuring...
8” tire 39” circumference
10” tire 53” circumference
30mph with 8” tire approximately 41mph with 10” tire.
Sent from my iPhone using Tapatalk
8” tire 39” circumference
10” tire 53” circumference
30mph with 8” tire approximately 41mph with 10” tire.
Sent from my iPhone using Tapatalk
Re: VBB 10" wheel conversion
Posted: Sun Aug 18, 2019 1:55 am
PK fork is for disc conversion. Will give small leftward misalignment (2-4mm standard). Re-fitting the mudguard is a pitfa - honestly the hardest part of going down that path.
Can get conversion hubs for VBB motor and front if discs and P200 aren’t ‘required’. Think you can even get speedo drive conversions also.
Can get conversion hubs for VBB motor and front if discs and P200 aren’t ‘required’. Think you can even get speedo drive conversions also.
Re: VBB 10" wheel conversion
Posted: Sun Sep 01, 2019 3:21 am
