Hello
Posted: Mon Jul 01, 2019 12:42 pm
Not been on here for a good few years so re-registered
My name is Paul, I ride a Series 2 with a muggy 186 Kit
Cheers
My name is Paul, I ride a Series 2 with a muggy 186 Kit
Cheers
Page 1 of 1
Re: Hello
Posted: Fri Jul 12, 2019 11:27 pm
Welcome back
Re: Hello
Posted: Sun Sep 01, 2019 10:45 am
welcome
Re: Hello
Posted: Sun Sep 01, 2019 12:54 pm
Hi Paul welcome back...........where you bin ? 
Re: Hello
Posted: Wed Sep 04, 2019 7:10 am
Hi finally found way back to this site, after riding for a year on my last rebuild as I gave up on the last 200 engine as to many issues. So re-built the original 150 with the pace maker gearbox plus all new upgraded internals and a Mugello 186cc, Af 42mm all ported and flange matched and running with a SH22 Dell with all the airbox mods a BGM filter and a/c stator. This winter project is to fit a PX Legshield toolbox, a pair of Lucas Pathfinders and change the carburettor. This is where i'm after some help initially I was going down the road of a PHB 26 Dell but have read that the Mikuni TM..TMX 24 is possibly a better carburettor so that's my choice I also want to keep the original look too. So am after any information on what inlet manifold, connecting pipe and jetting anyone has used. Cheers Bill