help needed to wire up complicated set up

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
GTFOMWSC
registered user
Posts: 276
Joined: Sat Jan 01, 2011 5:49 pm
ebay user ID: itsthewillo
Main scooter: GP230 Super Monza CS Tuned
Location: Rugby
Contact:

Mon Feb 11, 2019 2:58 pm

I need help to wire up my latest build,it's totally non standard so a wiring guru is needed,scoot is near Harbury Warwickshire.breakdown of what i need wiring is as follows with spec of scoot.Currently on a workbench as front end is not yet finished so has to done in situ.
Scoot is a RB225 full racer bodied drop handlebars and rearsets full motorbike style fairing
1.Variatronic ignition
2.Battery
3.Motorcycle bars with motorcycle light/indicator/horn combi switch.
4.LED indicators
5.Twin headlight,twin rear LED backlight
6.Ignition is down at the rear
7.Rearset brake light

What i have are about 6 wiring looms that can be chopped/cut/mutilated to suit,can get any wiring clips etc etc needed just need to know which ones required,so if anyone can do this please help can be contacted on Daz 07973871139 or dwillo2001@btinternet.com but need to do it urgently so i can finish the scoot.
the man don't give a f@@k

User avatar
GTFOMWSC
registered user
Posts: 276
Joined: Sat Jan 01, 2011 5:49 pm
ebay user ID: itsthewillo
Main scooter: GP230 Super Monza CS Tuned
Location: Rugby
Contact:

Mon Feb 11, 2019 3:01 pm

Also forgot to add a sip digital speedo with fuel guage etc etc needs to be hooked in.
the man don't give a f@@k

Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 8 guests