How to remove speedo drive if nut is burred
-
Tractorman
- registered user
- Posts: 5428
- Joined: Tue Apr 22, 2014 4:21 pm
- Main scooter: Lambretta li150 special
- Location: Lincoln
- Contact:
Use a little heat on the hub and then grips as WTF??? suggests
-
rosscla
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
Or file the burs off till you can get a spanner on it
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
-
Snails
- registered user
- Posts: 397
- Joined: Thu Jan 15, 2009 1:42 pm
- Location: Sunny Manchester
- Contact:
Mole grips are just ripping the soft brass to bits. It's jammed so tight I think the resistance is always going to be greater than the force the nut can take. Ive been trying heat as well from the start
Last desperate idea is to run a drill down the centre and hope that I can weaken it enough before I destroy the thread. Seems unlikely though
Last desperate idea is to run a drill down the centre and hope that I can weaken it enough before I destroy the thread. Seems unlikely though
