Scooterotica

whats people using ???
seen these but is anyone using these mallossi type?
& if so whats the quality of these like?
https://ve-uk.com/2017/05/11/malossi-un ... b-rubbers/

im wanting one for use with a Dellorto 32mm VHSA on a LTH left hand TS1 manifold.
it has 60mm stud spacings

cheers

I use the MB ones which are ribbed. The new ones in brown are meant to be stronger and better.

My original MB one split for my 28mm PWK, MB and all UK stockists are sold out, as are Scooter Center

Ended up having to get one of these
http://www.scooter-center.com/en/produc ... 71856*carb rubber*24*24*2*16

Pedparts do this one, I ordered one as well as its cheap, its a couple of mm too small (largest 32mm option, need a 34mm), but it will do as a toolbox spare in an emergency

http://www.pedparts.co.uk/product/865/s ... ld-adaptor#

I ended up ordering 2 of these
http://www.nichecycle.com/ncs/categorie ... y-ncs.html

as those from VE where a 55mm stud spacing & I need 60mm