Page 1 of 1

Softer Stand Spring

Posted: Mon Jan 01, 2018 4:18 pm
by Lamaddict
Can you get softer stand springs that don’t clatter the rear runners and are easier to push off the stand?

Re: Softer Stand Spring

Posted: Mon Jan 01, 2018 4:30 pm
by garry inglis
I think you'll find the stand drops down while riding with a softer spring that's if you could find one

Re: Softer Stand Spring

Posted: Tue Jan 02, 2018 9:29 am
by Timbo
Lamaddict wrote: Mon Jan 01, 2018 4:18 pm Can you get softer stand springs that don’t clatter the rear runners and are easier to push off the stand?

Have you got the return rubber on the side stand leg to stop this happening?

Re: Softer Stand Spring

Posted: Tue Jan 02, 2018 10:06 am
by HxPaul
Lamaddict wrote: Mon Jan 01, 2018 4:18 pm Can you get softer stand springs that don’t clatter the rear runners and are easier to push off the stand?
If its hard to push your scooter off the stand,it maybe that your stand is to long/it maybe that your stand bolts have come loose,causing the stand and the scooter to sit lower than it should.As for the stand hitting the rear runners,when I push my scooter off the stand I prevent the stand from hitting the rear runners with my foot.

Re: Softer Stand Spring

Posted: Tue Jan 02, 2018 11:13 am
by bristolmod
Timbo wrote: Tue Jan 02, 2018 9:29 am
Lamaddict wrote: Mon Jan 01, 2018 4:18 pm Can you get softer stand springs that don’t clatter the rear runners and are easier to push off the stand?

Have you got the return rubber on the side stand leg to stop this happening?
I think that no innocenti stand had the little bit on that a rubber was put over- Its one of the things the Spanish
/Indians improved IMO.