Gearbox rebuild kit

[Geocamper]

Looking for suggestions as to the best quality bearing gearbox rebuild kit.

[HxPaul]

In my opinion Japanese Koyo bearings are the best you can get.I'm a bit confused as to which bearings you want,is it the endplate bearings,gearcluster needle roller bearing,or the rear hub bearing.

[fluff34567]

Simply go to a bearing dealer and choose your own bearings. All the gearbox needle roller cages will be INA and then you decide is you want SKF FAG NACHI etc.

Be aware I know of 1 dealer that claims to supply INA bearings in the kit but those supplied are totally different to an INA in a stamped sealed box.

[Geocamper]

I'm looking at purchasing all the bearings to rebuild the gearbox of a series 2 150.

Sent from my SM-G900F using Tapatalk

[Scooterdude]

Ive used Scootopia rear hub bearings in the last couple of builds, they seem pretty decent. By contrast the indian ones sold by AF are dire.

[rosscla]

For the rear hub next time I'm going to use the LTH, that way you can fit a standard sized quality bearing in the back end.

[Scooterdude]

For the rear hub next time I'm going to use the LTH, that way you can fit a standard sized quality bearing in the back end.

Yes I've found a used hub bearing that is in two parts so you can put for example a standard SKF bearing in this outer carrier, neat idea but overall the actual bearing is quite a bit smaller.

[fluff34567]

Jockey's sell the same

[rosscla]

Jockey's sell the same

That's the one I meant, sorry confused LTH and Jockeys

[fluff34567]

I found the housing material very soft so beware.