I had hoped to buy a used Innocenti gear selector arm and shaft for a series 3 Li150 but no luck yet so I was looking at buying new.
Can anyone please tell me if a one piece GP gear selector arm and shaft will fit a series 3 Li150 case ok ? If so will the earlier selector fork fit to the GP Shaft ?
I had assumed that the GP part including the gear selector forks were interchangable with the earlier 2x piece arm and shaft but perhaps not as I notice the one piece shaft and arms are advertised as GP and not GP, LI, TV, SX etc .
question about gear selector arm compatibility
-
Grumpy225
- registered user
- Posts: 650
- Joined: Sat Nov 24, 2012 7:59 am
- Main scooter: Gori200, rt195, ld150,rb20
- Location: Bakersfield, CA
- Contact:
Yes the GP will interchange with the LI no problem.
If you really need a good Innocenti 2 piece I can take a look, I have a lot of that hardware. Assume you need the arm, shaft, bolt, washer, clip, O ring and shim (basically the whole assembly).
If you really need a good Innocenti 2 piece I can take a look, I have a lot of that hardware. Assume you need the arm, shaft, bolt, washer, clip, O ring and shim (basically the whole assembly).
-
johnny650
- registered user
- Posts: 395
- Joined: Wed Oct 12, 2016 10:18 pm
- Main scooter: lambretta 64 li 150 Special
- Contact:
wow that was quick
Yes please..I need the arm and shaft with the top washer , circlip and bolt ( I have the fork )
I know I bought all this last year but I'm blowed if I can find it .......
-
rosscla
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
I'll have a rummage under the bench tomorrow after work. I'm sure I have most of those parts.
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
-
rosscla
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
Sorry got distracted by family life tonight, so never got to the shed - will be out there tomorrow.
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
-
rosscla
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
I have this GP shaft / arm
Or this Li shaft
I have one arm that is jammed on a shaft with a broken in bolt and one that the rod pin has been ground off. I thought I had another but can't find it right now...
Sent from my iPhone using Tapatalk
Or this Li shaft
I have one arm that is jammed on a shaft with a broken in bolt and one that the rod pin has been ground off. I thought I had another but can't find it right now...
Sent from my iPhone using Tapatalk
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."
-
garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
just buy one