Scooterotica

I had hoped to buy a used Innocenti gear selector arm and shaft for a series 3 Li150 but no luck yet so I was looking at buying new.

Can anyone please tell me if a one piece GP gear selector arm and shaft will fit a series 3 Li150 case ok ? If so will the earlier selector fork fit to the GP Shaft ?

I had assumed that the GP part including the gear selector forks were interchangable with the earlier 2x piece arm and shaft but perhaps not as I notice the one piece shaft and arms are advertised as GP and not GP, LI, TV, SX etc .

Yes the GP will interchange with the LI no problem.

If you really need a good Innocenti 2 piece I can take a look, I have a lot of that hardware. Assume you need the arm, shaft, bolt, washer, clip, O ring and shim (basically the whole assembly).

Grumpy225 wrote: ↑Thu Aug 31, 2017 5:56 pm Yes the GP will interchange with the LI no problem.

If you really need a good Innocenti 2 piece I can take a look, I have a lot of that hardware. Assume you need the arm, shaft, bolt, washer, clip, O ring and shim (basically the whole assembly).

wow that was quick

Yes please..I need the arm and shaft with the top washer , circlip and bolt ( I have the fork )
I know I bought all this last year but I'm blowed if I can find it .......

I'll see what I can dig up tonight and get back to you in the morning (CA time).

sorry Grumpy I didn't notice your location. The shipping costs and transit time would probably kill the deal but thank you for offering anyway , you're a star !

I'll have a rummage under the bench tomorrow after work. I'm sure I have most of those parts.

johnny650 wrote: ↑Thu Aug 31, 2017 11:15 pm sorry Grumpy I didn't notice your location. The shipping costs and transit time would probably kill the deal but thank you for offering anyway , you're a star !

Couldn't find the parts I thought I had anyways.

Such is life.

Sorry got distracted by family life tonight, so never got to the shed - will be out there tomorrow.

I have this GP shaft / arm

Or this Li shaft



I have one arm that is jammed on a shaft with a broken in bolt and one that the rod pin has been ground off. I thought I had another but can't find it right now...


Sent from my iPhone using Tapatalk

just buy one