Hi chaps..i have a rapido 225 with a tmx 35 carb on her.has a jl exhaust and varitronic..
Pilot 20
Main 270
Needle 56 on 2nd clip
No fillter
Takes ages to start then wont tickover..when i get to tickover nicely it will then stick open when i blip throttle.so if i then undo the idle screw it will be ok for a while then stop running.i have looked on here and most are running bigger main and needle..i hope someone may be able to give some advice..cheers
Rapido 225 tmx set up
- garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
sounds like lack of fuel try a 22.5 pilot first and see if that sets up better if not a 25, main seems low more like 290 /300/310 and maybe a 57 needle on second clip but get it starting and ticking over first set airscrew 2turns out and go from there
-
- registered user
- Posts: 39
- Joined: Sat Mar 10, 2012 12:56 am
- Main scooter: lambretta li125 spanish
- Contact:
Thanks mrnice..it was a scoot i inherited from a mate who died..i wanted to try and give this carb a go but i was thinking of trying a 30mm delly if cant sort..i would lime to stick to mikuni for now tho...cheers