Page 1 of 1
VHSH emulsion tube?
Posted: Wed Jul 19, 2017 9:08 pm
by Andy W
Hi guys can anyone tell me if I can run without the little emulsion tube fitted above the pilot jet? If so what effect would this have on the pilot jet sizing? Currently fitted 50 pilot, CD1 emulsion tube.
Cheers for any replies Andy
Re: VHSH emulsion tube?
Posted: Thu Jul 20, 2017 5:23 am
by garry inglis
Yes you can I run two vhsh carbs one on my rb2oo with a normal pilot jet 42 and a 45 in my ts230 the emulsion tube helps starting and up to quarter throttle I've had both mine dynod and perfectly safe just check plug colour
Sent from my SM-A320FL using Tapatalk
Re: VHSH emulsion tube?
Posted: Tue Jul 25, 2017 9:05 am
by Andy W
Cheers for the reply Garry, did you have to change (smaller/bigger size) the pilot to compensate for no emulsion tube?
Re: VHSH emulsion tube?
Posted: Tue Jul 25, 2017 12:11 pm
by garry inglis
I went from a 50 to a 42 without emulsion
Re: VHSH emulsion tube?
Posted: Tue Jul 25, 2017 12:12 pm
by garry inglis
Just to add with the 50 I didn't need choke to start with a 42 I need the choke
Re: VHSH emulsion tube?
Posted: Wed Aug 02, 2017 7:48 am
by Andy W
Cheers Garry this is for my race RB20 race engine in the BSSO Production Class, new jets have been ordered.
Re: VHSH emulsion tube?
Posted: Wed Aug 02, 2017 8:11 am
by garry inglis
My mate Barry one last year and he is coming back next year
Re: VHSH emulsion tube?
Posted: Tue Dec 26, 2017 8:05 pm
by corrado
Andy W wrote: ↑Wed Aug 02, 2017 7:48 am
Cheers Garry this is for my race RB20 race engine in the BSSO Production Class, new jets have been ordered.
What jetting did you finish up using Andy on the RB20 race engine? I'd like to try a VHSH over the PHBH currently on my RB.
Re: VHSH emulsion tube?
Posted: Wed Jan 10, 2018 9:02 am
by Andy W
Martin, sorry for the delay in replying. I have sent you a PM with settings after Cadwell Park races, hope they help.
Andy