GT Kit Jetting
Posted: Sun Jul 12, 2009 3:28 pm
Anyone else using GT186, Delly 25 PHBL and AF Clubman?
What jetting, needle and clip setting do you have?
What jetting, needle and clip setting do you have?
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
GT Kit Jetting
Page 1 of 4
Re: GT Kit Jetting
Posted: Sun Jul 12, 2009 3:33 pm
Rob Miller using this set up on his TV2 . and it goes reet good. i"ll give him a buzz.
Re: GT Kit Jetting
Posted: Tue Jul 14, 2009 8:42 am
That would be helpful, thanksgoldeneye wrote:Rob Miller using this set up on his TV2 . and it goes reet good. i"ll give him a buzz.
Re: GT Kit Jetting
Posted: Tue Jul 14, 2009 11:07 am
isnt it covered in the instructions on this kit?
Re: GT Kit Jetting
Posted: Tue Jul 14, 2009 2:09 pm
Only says main jet 93-97, but I was wondering what others were using as all motors differ and I'm on the botton clip D22 needle with AQ266 atomiser and 100 main, yet it's still lean when cruising.cezeta wrote:isnt it covered in the instructions on this kit?
Re: GT Kit Jetting
Posted: Tue Jul 14, 2009 5:27 pm
Try a bigger needle jet a 268 should be better
Re: GT Kit Jetting
Posted: Tue Jul 14, 2009 5:31 pm
Thanks J1MS, I understand that, I was just curious as to what others had settled on.
I was just curious as to what others had settled on.Re: GT Kit Jetting
Posted: Tue Jul 14, 2009 7:43 pm
any idea of the power output of these kits? i have one for one of my servetas.
Re: GT Kit Jetting
Posted: Tue Jul 14, 2009 10:34 pm
Done right they can make 17hp on our dyno with a JL3
Re: GT Kit Jetting
Posted: Wed Jul 15, 2009 9:27 am
What's that Al, 206cc?Diablo wrote:Done right they can make 17hp on our dyno with a JL3
Are you still running yours?