![Image](http://i1197.photobucket.com/albums/aa425/dave411/Lambretta%20LI%20125/3753D2D3-9B64-4628-BF94-2A21BFF24218_zps1uajeyao.jpg)
![Image](http://i1197.photobucket.com/albums/aa425/dave411/Lambretta%20LI%20125/550A132D-AA85-43ED-BDA3-2F54D99D57DD_zpsp8oqzryn.jpg)
Its a 198 Mugello,26mm Delly,GP 50 pipe.
Main 100
Atomizer AV266
Needle x7
Slide 45
Timing 23 static,Varitronic fitted.
garry inglis wrote:ive just been in my shed to look at my book and ive got this main 118 /120 av266 2nd clip x7 pilot 50/55 slide 40 choke 70 i think you want try one change at a time and keep doing plug chops but better to be rich than lean
Thanks Mick.Yes,I am running in,but have more oil in the mix.25:1.mick1 wrote:Try putting an older plug in (oily....ish) and see if it changes colour.
If your running in are you marking throttle positions and doing plug chops at different throttle positions ? If your running-in you might not be coming onto the main jet and you could be lean elsewhere (pilot, needle, etc).
Ok,will give that a go.mick1 wrote:get some masking tape and mark your throttle 1/8. 1/4. 1/2. 3/4
Run about a mile holding at the position then cut the engine and check the plug.
This will help identify if your, pilot, needle (+ clip position), slide, atomizer and main jet are ok