Fuel flow rates?

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Post Reply Previous topicNext topic
Snails
registered user
Posts: 397
Joined: Thu Jan 15, 2009 1:42 pm
Location: Sunny Manchester
Contact:
Contact Snails

Troubleshooting a few issues with a couple of my lambrettas and so I thought I would check fuel flow rates on both

The figures I got were:

GP 175 - 2 1/4 pints (about 500ml) per minute
Lui 125 - 1 1/4 pints (about 270ml) per minute

What figure should I be looking for. Do either of these appear on the low side for the respective engine capacities?

Tried to find the recentish article on this that I swore was in scootering but couldnt find it.:(
Top
User avatar
HxPaul
registered user
Posts: 1110
Joined: Fri Dec 06, 2013 1:58 pm
Main scooter: lambretta Li 150
Location: Halifax,Yorkshire
Contact:
Contact HxPaul

In Stickys manual he says that a standard tap should flow at least 250mil per minute and for a tuned motor he suggests 500mil in less than a minute.
Top
Snails
registered user
Posts: 397
Joined: Thu Jan 15, 2009 1:42 pm
Location: Sunny Manchester
Contact:
Contact Snails

Ah thanks Paul. Looks ok then for both :)
Top
Post Reply Previous topicNext topic

Return to “Lambretta Tech”

  • Information

  • Who is online

    Users browsing this forum: No registered users and 56 guests

Powered by phpBB™ • Design by PlanetStyles