Page 1 of 1
Cleaning the scoot-How far is to far
Posted: Tue Mar 28, 2017 6:08 pm
by burridge01
In the process of selling the S1 and as it never sold last time thought i'd give it a good clean.Took the rear wheel/hub off to sort the brake and started to clean the inner part of the engine/inner mudgaurd and under the loop.3 hours later
and it still needs more work(not been cleaned in 8 years
)
How far is to far,want it to look good to sell but it;s bloody hard work
Re: Cleaning the scoot-How far is to far
Posted: Tue Mar 28, 2017 7:03 pm
by dazblakey
I'd put a couple of pictures up in this thread you might sell it on here
Re: Cleaning the scoot-How far is to far
Posted: Tue Mar 28, 2017 7:53 pm
by fluff34567
Get a good grease cutting agent and it's a spray on quick brush and rinse off.
Re: Cleaning the scoot-How far is to far
Posted: Tue Mar 28, 2017 10:44 pm
by Timbo
Clean it so it looks like it just left the factory...
Re: Cleaning the scoot-How far is to far
Posted: Tue Mar 28, 2017 11:42 pm
by coaster
Good spray with Gunk or similar, let it soak for half an hour then blast it with a jet washer. Let dry then go over electrics and gear cables with WD40
Re: Cleaning the scoot-How far is to far
Posted: Wed Mar 29, 2017 1:48 pm
by woody
Lower the price ?
Re: Cleaning the scoot-How far is to far
Posted: Wed Mar 29, 2017 5:22 pm
by burridge01
Timbo wrote:Clean it so it looks like it just left the factory...
dazblakey wrote:I'd put a couple of pictures up in this thread you might sell it on here
If i new how i would
woody wrote:Lower the price ?
S1 TS1 240 in good nick £4750,don't think i'm pullin any ones pants down
