Scooterotica

Posted: **Fri Jan 13, 2017 2:23 pm**

Hi guys

I have a sip digital speedo coming in the post for my 2016 PX 150 and have been looking at the online manual.

The one thing that isnt clear to me is where the control box goes? - are you supposed to cram it in the headset somewhere ?

Where did you put yours ? - any pics would be useful too

Posted: **Fri Jan 13, 2017 3:15 pm**

The easiest place is in the headset as you have the lights to pickup for the revs etc... it is a squeeze but on its side.
If you have a battery model then you can use the extension lead and tie wrap to the battery housing, you can then pick up the pulse from the rear loom.

Posted: **Fri Mar 03, 2017 10:58 pm**

Did the same, used some double sided tape and squeezed in behind the headlight

Scooterotica

SiP Speedo in a new PX - where did you put the box ?

SiP Speedo in a new PX - where did you put the box ?

Re: SiP Speedo in a new PX - where did you put the box ?

Re: SiP Speedo in a new PX - where did you put the box ?