Scooterotica

...not our work, but very nice....

through the barrel studs ???

can´t see any improvment of mixture flow going this way.

fishi

It's RS Performances Works, my TS1 with Xtra boost port!
David

fishi wrote:through the barrel studs ???

can´t see any improvment of mixture flow going this way.

fishi

Are yes but what you can do is grind down you studs and make them thinner so gas can go round

Like this Now



Need I say any more

Smiffy

fine art of work

but the RB will has them without grinding down the studs, with surly more mixture flow.

The engine cases on your photo, obviusly, is welded for an watercooled barrel with big transfers.

cheers
fishi

fishi wrote:fine art of work

but the RB will has them without grinding down the studs, with surly more mixture flow.

The engine cases on your photo, obviusly, is welded for an watercooled barrel with big transfers.

cheers
fishi

Fishi you are quite right & I wont distprute it

But the above was done well before the concept of the RB m8

Smiffy

i presume that may be ralphs block...........

RinB wrote:

Smiffy

Mmmmmmmmmmmmmmm ....................

Sean ralph ????

Hey I like this Mod stuff

I think I showed a point

what happened to all those cool pictures?