Scooterotica

Just fitting a gt200 kit and need help with what chain and sprocket i need to use 
my set up is , gt200 top end 60/110 crank, italian gp200 box ,30mm phbh carb and a bgm box pipe , i will be mostly 2 up and mainly for touring 
any help would be good , Steve

Hi Steve,

Assuming you still have a 47t crown wheel I'd up the primary drive to 19/47 to give you 4.947:1 final drive ratio. You'll need an 83 link chain and pull down tensioner. I have both in stock PM me for details

Hi Steve,

Assuming you still have a 47t crown wheel I'd up the primary drive to 19/47 to give you 4.947:1 final drive ratio. You'll need an 83 link chain and pull down tensioner. I have both in stock PM me for details