Just fitting a gt200 kit and need help with what chain and sprocket i need to use
my set up is , gt200 top end 60/110 crank, italian gp200 box ,30mm phbh carb and a bgm box pipe , i will be mostly 2 up and mainly for touring
any help would be good , Steve
gt200 gearing help
-
steve chapman
- registered user
- Posts: 231
- Joined: Sat May 09, 2009 2:31 pm
- Contact:
-
Rich_T
- Dealer
- Posts: 540
- Joined: Fri May 29, 2009 8:07 pm
- Main scooter: Li Special
- Location: Birmingham
- Contact:
Hi Steve,
Assuming you still have a 47t crown wheel I'd up the primary drive to 19/47 to give you 4.947:1 final drive ratio. You'll need an 83 link chain and pull down tensioner. I have both in stock PM me for details
Assuming you still have a 47t crown wheel I'd up the primary drive to 19/47 to give you 4.947:1 final drive ratio. You'll need an 83 link chain and pull down tensioner. I have both in stock PM me for details
-
Rich_T
- Dealer
- Posts: 540
- Joined: Fri May 29, 2009 8:07 pm
- Main scooter: Li Special
- Location: Birmingham
- Contact:
Hi Steve,
Assuming you still have a 47t crown wheel I'd up the primary drive to 19/47 to give you 4.947:1 final drive ratio. You'll need an 83 link chain and pull down tensioner. I have both in stock PM me for details
Assuming you still have a 47t crown wheel I'd up the primary drive to 19/47 to give you 4.947:1 final drive ratio. You'll need an 83 link chain and pull down tensioner. I have both in stock PM me for details