Page 1 of 2
rb 250 avanti or normal head
Posted: Tue Oct 04, 2016 3:32 pm
by garry inglis
hi thinking off getting rb250 what is the avanti head going to give the kit that the normal compression head wont is it better cooling and whats the best crank people are using thinking rich taylor 60/110
Re: rb 250 avanti or normal head
Posted: Tue Oct 04, 2016 5:46 pm
by jonashford
Avanti head much better than std
Sent from my iPhone using Tapatalk
Re: rb 250 avanti or normal head
Posted: Tue Oct 04, 2016 5:46 pm
by jonashford
Avanti head much better than std, offers better cooling
Sent from my iPhone using Tapatalk
Re: rb 250 avanti or normal head
Posted: Wed Oct 05, 2016 9:41 am
by 1469leach
contact rayspeed and speak to Ben between 5-6 on weekdays, they will give you some good info on this issue and they are now making there own heads with better cooling.
cheers Jeff
Re: rb 250 avanti or normal head
Posted: Wed Oct 05, 2016 12:32 pm
by garry inglis
thanks i will do that but we no what its like getting hold of them busy boys
Re: rb 250 avanti or normal head
Posted: Wed Oct 05, 2016 1:54 pm
by holty
im going to rayspeed on saturday, i will ask them about the new head when im there.
Re: rb 250 avanti or normal head
Posted: Wed Oct 05, 2016 2:25 pm
by garry inglis
Great holty let us no I've got a casing at Oiltek getting turned into a200 end of November before I get it back so plenty time to consider options
Re: rb 250 avanti or normal head
Posted: Wed Oct 05, 2016 4:55 pm
by holty
you will also have to have the neck where the spiggot fits into machined to fit the rb250, as the spiggot is bigger than a 200 barrel, you probably already know this, great kit by the way.
Re: rb 250 avanti or normal head
Posted: Wed Oct 05, 2016 5:05 pm
by garry inglis
I £20 he charges not bad
Re: rb 250 avanti or normal head
Posted: Sat Oct 08, 2016 9:51 pm
by holty
[imghttp://i1168.photobucket.com/albums/r500/holty1966/IMG_0020_zpsu8e9h8xg.jpg][/img]
went to rayspeed today and had a look at the new rb heads, similar to the ron moss avanti head, but has some extra vanes thant go towards the barrel, and some vents next to the vanes, comes with a hole for a temp gauge and all exhausts will fit, ben told me that temperatures take a lot longer to rise than a standard head, and dont get so high, it also cools down much quicker than the standard head, will not fit onto an avanti barrel as the extra vanes would get in the way.